Bienvenido a los foros de FT81x Manía. Te invitamos a regístrate totalmente gratis. Disfruta de tu experiencia con un grandes amigos y Staff.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Thread Contributor: RndMnkIIIDocumentación STM32F103C8T6

#1
0
Documentación oficial de STM de los microcontroladores STM32F103RC y F103VET6: STM32F103RC-F103VET6 *
Mainstream Performance line, ARM Cortex-M3 MCU with 256 Kbytes Flash, 72 MHz CPU, motor control, USB and CAN

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM

The STM32F103xx high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.
These features make the STM32F103xx high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.

Features
  • Core: ARM® 32-bit Cortex
    - 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
    - Single-cycle multiplication and hardware division

  • Memories
    - 256 to 512 Kbytes of Flash memory
    - up to 64 Kbytes of SRAM
    - Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
    - LCD parallel interface, 8080/6800 modes

  • Clock, reset and supply management
    - 2.0 to 3.6 V application supply and I/Os
    - POR, PDR, and programmable voltage detector (PVD)
    - 4-to-16 MHz crystal oscillator
    - Internal 8 MHz factory-trimmed RC
    - Internal 40 kHz RC with calibration
    - 32 kHz oscillator for RTC with calibration

  • Low power
    - Sleep, Stop and Standby modes
    - V

  • 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
    - Conversion range: 0 to 3.6 V
    - Triple-sample and hold capability
    - Temperature sensor

  • 2 × 12-bit D/A converters
  • DMA: 12-channel DMA controller
    - Supported peripherals: timers, ADCs, DAC, SDIO, I
    -

  • Debug mode
    - Serial wire debug (SWD) & JTAG interfaces
    - Cortex

  • Up to 112 fast I/O ports
    - 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

  • Up to 11 timers
    - Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
    - 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
    - 2 × watchdog timers (Independent and Window)
    - SysTick timer: a 24-bit downcounter
    - 2 × 16-bit basic timers to drive the DAC

  • Up to 13 communication interfaces
    - Up to 2 × I
    - Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
    - Up to 3 SPIs (18 Mbit/s), 2 with I
    - CAN interface (2.0B Active)
    - USB 2.0 full speed interface
    - SDIO interface

  • CRC calculation unit, 96-bit unique ID
  • ECOPACK
* PARA VER DETALLES CONCRETOS DE UN MICROCONTROLADOR HAY QUE CONSULTAR EL DATASHEET EN LA SECCIÓN DONDE SE DETALLAN COSAS COMO EL TIPO DE ENCAPSULADO, NUMERO DE PINES, Nº DE PUERTOS SPI, UART, I2C, ...
<<<RndMnkIII>>>
rndmnkiii@gmail.com
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)