Bienvenido a los foros de FT81x Manía. Te invitamos a regístrate totalmente gratis. Disfruta de tu experiencia con un grandes amigos y Staff.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Thread Contributor: RndMnkIIIDocumentación STM32F407ZGT6-F407VET6-F429IGT6

#1
0
Documentación oficial de STM de los microcontroladores STM32F407ZGT6, STM32F407VET6 y STM32F429IGT6: STM32F407ZGTx -STM32F407VE *
High-performance foundation line, ARM Cortex-M4 core with DSP and FPU, 1 Mbyte Flash, 168 MHz CPU, ART Accelerator, Ethernet, FSMC.

The STM32F405xx and STM32F407xx family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.

Features
  • Core: ARM®32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories
    - Up to 1 Mbyte of Flash memory
    - Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
    - Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories

  • LCD parallel interface, 8080/6800 modes
  • Clock, reset and supply management
    - 1.8 V to 3.6 V application supply and I/Os
    - POR, PDR, PVD and BOR
    - 4-to-26 MHz crystal oscillator
    - Internal 16 MHz factory-trimmed RC (1% accuracy)
    - 32 kHz oscillator for RTC with calibration
    - Internal 32 kHz RC with calibration
    - Sleep, Stop and Standby modes
    - VBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

  • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode
  • 2×12-bit D/A converters
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  • Debug mode
    - Serial wire debug (SWD) & JTAG interfaces
    - Cortex-M4 Embedded Trace Macrocell™

  • Up to 140 I/O ports with interrupt capability
    - Up to 136 fast I/Os up to 84 MHz
    - Up to 138 5 V-tolerant I/Os

  • Up to 15 communication interfaces
    - Up to 3 × I2C interfaces (SMBus/PMBus)
    - Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
    - Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
    - 2 × CAN interfaces (2.0B Active)
    - SDIO interface

  • Advanced connectivity
    - USB 2.0 full-speed device/host/OTG controller with on-chip PHY
    - USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
    - 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

  • 8- to 14-bit parallel camera interface up to 54 Mbytes/s
  • True random number generator
  • CRC calculation unit
  • 96-bit unique ID
  • RTC: subsecond accuracy, hardware calendar

STM32F429IGT6 *

High-performance advanced line, ARM Cortex-M4 core with DSP and FPU, 1 Mbyte Flash, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT.

The STM32F427xx and STM32F429xx devices are based on the high-performance ARM®Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F427xx and STM32F429xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers.
They also feature standard and advanced communication interfaces.

Features
  • Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories
    - Up to 2 MB of Flash memory organized into two banks allowing read-while-write
    - Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM
    - Flexible external memory controller with up to 32-bit data bus: SRAM,PSRAM,SDRAM/LPSDR SDRAM , Compact Flash/NOR/NAND memories

  • LCD parallel interface, 8080/6800 modes
  • LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
  • Clock, reset and supply management
    - 1.7 V to 3.6 V application supply and I/Os
    - POR, PDR, PVD and BOR
    - 4-to-26 MHz crystal oscillator
    - Internal 16 MHz factory-trimmed RC (1% accuracy)
    - 32 kHz oscillator for RTC with calibration
    - Internal 32 kHz RC with calibration
    - Sleep, Stop and Standby modes
    - VBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

  • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
  • 2×12-bit D/A converters
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  • Debug mode
    - SWD & JTAG interfaces
    - Cortex-M4 Trace Macrocell™

  • Up to 168 I/O ports with interrupt capability
    - Up to 164 fast I/Os up to 90 MHz
    - Up to 166 5 V-tolerant I/Os

  • Up to 21 communication interfaces
    - Up to 3 × I2C interfaces (SMBus/PMBus)
    - Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
    - Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock
    - 1 x SAI (serial audio interface)
    - 2 × CAN (2.0B Active) and SDIO interface

  • Advanced connectivity
    - USB 2.0 full-speed device/host/OTG controller with on-chip PHY
    - USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
    - 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

  • 8- to 14-bit parallel camera interface up to 54 Mbytes/s
  • True random number generator
  • CRC calculation unit
  • RTC: subsecond accuracy, hardware calendar
  • 96-bit unique ID

* PARA VER DETALLES CONCRETOS DE UN MICROCONTROLADOR HAY QUE CONSULTAR EL DATASHEET EN LA SECCIÓN DONDE SE 
DETALLA COSAS COMO EL TIPO DE ENCAPSULADO, NUMERO DE PINES, Nº DE PUERTOS SPI, UART, I2C, ...
<<<RndMnkIII>>>
rndmnkiii@gmail.com
Reply
#2
1
Better response on post RE: Documentación STM32F407ZGT6-F407VET6-F429IGT6
(08-09-2017, 13:27 00)RndMnkIII Wrote: Documentación oficial de STM de los microcontroladores STM32F407ZGT6, STM32F407VET6 y STM32F429IGT6: STM32F407ZGTx -STM32F407VE *
High-performance foundation line, ARM Cortex-M4 core with DSP and FPU, 1 Mbyte Flash, 168 MHz CPU, ART Accelerator, Ethernet, FSMC.

The STM32F405xx and STM32F407xx family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.

Features
  • Core: ARM®32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories
    - Up to 1 Mbyte of Flash memory
    - Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
    - Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories

  • LCD parallel interface, 8080/6800 modes
  • Clock, reset and supply management
    - 1.8 V to 3.6 V application supply and I/Os
    - POR, PDR, PVD and BOR
    - 4-to-26 MHz crystal oscillator
    - Internal 16 MHz factory-trimmed RC (1% accuracy)
    - 32 kHz oscillator for RTC with calibration
    - Internal 32 kHz RC with calibration
    - Sleep, Stop and Standby modes
    - VBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

  • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode
  • 2×12-bit D/A converters
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  • Debug mode
    - Serial wire debug (SWD) & JTAG interfaces
    - Cortex-M4 Embedded Trace Macrocell™

  • Up to 140 I/O ports with interrupt capability
    - Up to 136 fast I/Os up to 84 MHz
    - Up to 138 5 V-tolerant I/Os

  • Up to 15 communication interfaces
    - Up to 3 × I2C interfaces (SMBus/PMBus)
    - Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
    - Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
    - 2 × CAN interfaces (2.0B Active)
    - SDIO interface

  • Advanced connectivity
    - USB 2.0 full-speed device/host/OTG controller with on-chip PHY
    - USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
    - 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

  • 8- to 14-bit parallel camera interface up to 54 Mbytes/s
  • True random number generator
  • CRC calculation unit
  • 96-bit unique ID
  • RTC: subsecond accuracy, hardware calendar

STM32F429IGT6 *

High-performance advanced line, ARM Cortex-M4 core with DSP and FPU, 1 Mbyte Flash, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT.

The STM32F427xx and STM32F429xx devices are based on the high-performance ARM®Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F427xx and STM32F429xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers.
They also feature standard and advanced communication interfaces.

Features
  • Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories
    - Up to 2 MB of Flash memory organized into two banks allowing read-while-write
    - Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM
    - Flexible external memory controller with up to 32-bit data bus: SRAM,PSRAM,SDRAM/LPSDR SDRAM , Compact Flash/NOR/NAND memories

  • LCD parallel interface, 8080/6800 modes
  • LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
  • Clock, reset and supply management
    - 1.7 V to 3.6 V application supply and I/Os
    - POR, PDR, PVD and BOR
    - 4-to-26 MHz crystal oscillator
    - Internal 16 MHz factory-trimmed RC (1% accuracy)
    - 32 kHz oscillator for RTC with calibration
    - Internal 32 kHz RC with calibration
    - Sleep, Stop and Standby modes
    - VBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

  • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
  • 2×12-bit D/A converters
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  • Debug mode
    - SWD & JTAG interfaces
    - Cortex-M4 Trace Macrocell™

  • Up to 168 I/O ports with interrupt capability
    - Up to 164 fast I/Os up to 90 MHz
    - Up to 166 5 V-tolerant I/Os

  • Up to 21 communication interfaces
    - Up to 3 × I2C interfaces (SMBus/PMBus)
    - Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
    - Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock
    - 1 x SAI (serial audio interface)
    - 2 × CAN (2.0B Active) and SDIO interface

  • Advanced connectivity
    - USB 2.0 full-speed device/host/OTG controller with on-chip PHY
    - USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
    - 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

  • 8- to 14-bit parallel camera interface up to 54 Mbytes/s
  • True random number generator
  • CRC calculation unit
  • RTC: subsecond accuracy, hardware calendar
  • 96-bit unique ID

* PARA VER DETALLES CONCRETOS DE UN MICROCONTROLADOR HAY QUE CONSULTAR EL DATASHEET EN LA SECCIÓN DONDE SE 
DETALLA COSAS COMO EL TIPO DE ENCAPSULADO, NUMERO DE PINES, Nº DE PUERTOS SPI, UART, I2C, ...
Hola,

Tengo un "STM32F407VET6 desarrollo de la junta Cortex-M4 STM32", y me pregunto si tienes el diagrama de conexión de los pines JTAG / SWD debbugging, SD card, etc?
Saludos
Reply
#3
0
Podrías poner una foto de tu placa STM32F407VET6 ?

Gracias. Wink
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)